您好!欢迎光临广东汇佳电子科技有限公司,您是第 1662 位访客!
2019年09月01日 06:57 | 客户登录
数码钟 >> 返回 您当?#20843;?#22312;位置:首页 > 产品展示 > 数码钟 > 正文

MT1138B

更新时间:2016-02-17 09:47:36点击次数:1096次字号:T|T
相关介绍
MT1138方形圆角木头钟使?#30431;?#26126;书(V1.2)
概述:
本产品采用时尚LED显示元素,能显示小时、分钟、温度,具有时间、温度、闹铃、?#20843;?#26085;历、查询、12/24小时制、亮度减半、省电等功能,4个按键,双电源供电,
备份电池。可放置在床头、书桌、客厅、?#22836;俊?#30149;房等地方,可作计时、定时、闹铃、测温等作用,产品大方美观、安全、环保、时?#23567;?#23454;用。
功能介绍:
?显示时间、温度,时间、温度自动切换显示,可查询月、日,初始上电为2012年1月1日12:00:00;
?12/24小时制:可以进行12/24小时转换,默认值24小时制;
?4个按键操作:MODE键,SET键,UP键,DOWN键;
?闹铃功能: 闹铃时间到时响闹一分钟声音为“嘀嘀 嘀嘀?#20445;?#22312;响闹状态下按?#25105;?#25353;键都可停止响闹;
??#20843;?#21151;能:在闹铃响闹状态下,若无?#25105;?#25353;键,则5分钟后闹铃继续响闹(共4次);
?省电功能:正常模?#36739;?#25353;住MODE键3秒关闭LED显示,进入省电模式;
?亮度自动减半功能,显示亮度在晚上10:00至早上6:00将自动减半;
?查询功能:在正常走时状态下,按MODE键可查询月、日、闹铃温度;
?日历功能:从2000年1月1日到2099年12月31日;
?温度测量范围:-30℃~50℃;
?双电源供电功能,在外部电源断电后仍可走时,但无闹铃显示,?#37096;?#29992;4节5号碱性电池供电通过背面开关来切换供电;
操作步骤:
1、安装:拆开包装请将本产品附带的DC变压器插到220V/50Hz照明电路上(电压通用范围100V—240V 50Hz/60Hz),DC/6V插到该产品的DC插座,
产品进入自检,自检无误后有“嘀”声,显示12:00:00,进入正常走时状态,52秒后自动切换温度显示,再8秒后自动切换回时间显示。
2、SET键操作:
◆在正常显示状态下,按SET键进入设置状态,被设置值闪动,设?#30431;?#24207;为:时→分→年→月→日→闹铃时→闹铃分→?#39034;觥?br /> 3、UP键操作:
◆在正常走时状态下,按UP键开启/关闭闹铃。
◆在正常显示状态下,按住UP键3秒,可切换固定时间、时间\温度转换显示;
◆设置状态下,按UP键?#31995;?#34987;设置值,按住不放可快速?#31995;鰲?br /> 4、DOWN键操作:
◆正常走时状态下,按DOWN键切换12/24小时制模?#36739;?#31034;,在12小时?#39057;?#27169;?#36739;?#31034;下,下午时间PM灯亮。
◆设置状态下,按DOWN键下调被设置值,按住不放可快速下调。
5、MODE键操作:
◆正常走时状态下,?#36138;碝ODE键切换时分/月日/闹铃/温度显示;长按MODE键3秒可以关闭显示(内部时钟仍在走时)进入省电模式,再按MODE键可返回正常显示模式。
◆设置状态下,按MODE键?#39034;?#35774;置状态,返回正常显示模式。
其他信息:
1:产品尺寸:长X宽X高=210X90X48毫米
2:外包装尺寸: 长X宽X高=265X126X85毫米
3:产品净重: 298克     毛重:425克
4:产品的功耗:1.8瓦(红色LED),0.8瓦(白色LED)
5:电源输入电压: AC 50Hz/60Hz 100V-240V   产品输入电压:DC6.0V
注意事项:
1:产品背后伸出的两黑线,线头的黑点是温度探测传感器,要求注意放置,不能用力拉扯,否则容易损坏。
2:当使用AA1.5X4的电池供电时,请将后面的拨动开关从“1”位拨到“2”位;使用DC6.0V供电时,该拨动开关从“2”位拨回到“1”位。
3:当拔电后,时间无记忆,要求更换CR2032锂电池,可以在正常走时状态下更换。
产品保证与维修:
本产品若遇质量问题,请与经销商联系或登录网站http://www.mtclock.com,把您的问题?#20174;?#32473;我们。

MT1138 Square Fillet wooden clock manual(V1.2)
Summary:
MT1138 wooden clock uses LED displayer , It can display time and temperature; it has such as alarm, snooze, calendar,12/24 hour etc functions,. 4 keys operation and two power supply,
.     This clock can use in fashionable, safe and practical. It is fit for placing in the front of bed, on the desk, in the living room, in the sickroom and so on.
Features:
◆Directly show time and temperature. This two display mode switches automatically. And show month and day indirectly. Show 12:00:00 when first connected to power with January 1st, 2012;
◆12/24 hour display mode ,can be converted,  default: 24 hours;
◆4 keys operation: MODE key, SET key, UP key and DOWN key.
◆Alarm function: the alarm sounds from transducer for one minute, "DiDi DiDi". The alarm can be turned on or off directly. When the transducer is alarming, pressing any keys can be stop;
◆Snooze function: if there’s no key pressed when the alarm transducer is sounding, the alarm transducer will sound after 5 minutes (total 4 times);
◆Sleep function: in normal display mode, pressing MODE key for long 3 seconds will close the led display and let the wooden clock enter into sleep mode;
◆For MT1108, the brightness in the night 10:00 to 6:00 in the morning will be halved.
◆Seeing function: in normal display mode, pressing MODE key shortly can see date, alarm and temperature.
◆Calendar function: from January 1st, 2000 to December 31st, 2099.
◆Testing temperature: -30℃~50℃.
◆Dual power supply, when taking off the external power supply, the internal cell still supplies timer working, but no display and alarm.
◆ It can also use 4 PCS AA batteries by changing the switch in the back panel.
Detailed steps
1、Installation: Please break open the packaging of the product attached to DC transformer into 220V/50Hz lighting circuits (application of the voltage 100V---240V50/60Hz),DC/6V product plug into the DC outlet.
For the first time you use, please be connected to the DC/6V first, then the wooden clock will enter into self-test mode, self-correct after the “DI" sound, and show 12:00. Then the built-in battery out of the
Insulation film, switching automatically show the temperature 3 seconds after displaying the time 8 seconds, and then automatically switch back to the show time.
2、SET key:
In normal display mode, pressing SET key will enter to setting status, the setting value is flashing, the setting order is: hour→minute→year→month→day→alarm hour→alarm minute→quit.
3、UP key:
◆In normal display mode, pressing UP key will turn on or turn off alarm.
◆In normal display mode, holding UP key over 3 seconds exchange time and time/temperature displayer;
◆In setting mode, pressing UP key will upward-adjust the setting value, if pressing UP key for long, the setting value can fast-upward.
4、DOWN key:
◆In normal display mode, pressing DOWN key will convert 12/24 hour display mode. And in 12 hour display mode, the PM indicator light will be lighted between 12:00 and 23:59 which in 24 hour.
◆In setting mode, pressing DOWN key will downward-adjust the setting value, if pressing DOWN key for long, the setting value can fast-downward.
5、MODE key:
◆In normal display mode, pressing MODE key for short will make the display content change among time, date, alarm time and temperature. Pressing MODE key for long 3 seconds will close the led display and
let the wooden clock enter into sleep mode (the internal clock is still going). And then MODE key to open the show.
◆In setting mode, pressing MODE key will quickly exit setting mode and return to normal display mode.
Other features:
1.the size of product: 210×90×48mm
2.the size of outer packing: 265×126×85mm
3.net weight: 298g    gross weight: 425g
4.power consumption: 1.8Walt(red led), 0.8Walt(white LED);
5.AC input: AC100-240V 50/60Hz     DC output: DC6.0V 600mA

Caution:
1.There’re two black lines in the back panel, and the ends of these two lines are connected to a small black dot,
which is the temperature sensor. Please be careful of the position of the sensor, and should not pull it or press it.
2.When using 4 available AA batteries, you should turn the switch from “1” to “2”, the switch is in the back panel; when using the DC6.0V, you should turn the switch back to “1”.
3.Without DC6.0V or 4 available AA batteries, if the time is not going, you should change the CR2302 battery while the DC6.0V or 4 available AA batteries are connected.
Services:
If having any product problem, please contact with the dealer or visit the website http://www.mtclock.com and send your problem to us, thank you!
0 条评论
不想登录?直接点击发?#25216;?#21487;作为游客留言。
产品展示
Products
联系方式
020-89287367
投诉电话:13332851028
传真:020-89285725
地址:广州市天河区白沙水路162号4楼
关注我们
    
Copyright ? 2003 - 2019 www.hnyw.tw All Rights Reserved    粤ICP备:09077962   广东汇佳电子科技有限公司 ? 版权所有
牌神 北京快中彩连锁 江苏骰宝结果 现在最赚钱的平台有哪些 排列3字谜太湖情人203 体彩p5 临沂刮刮乐在线购买 快乐时时彩是哪里的 梭哈英文 陕西十一选五计划 福彩中心中奖简报 浙江快乐彩十二选五 3d走势图5oo期 湖北快三1500期走势图 pk10历史开奖走势图 重庆福彩幸运农场玩法